Clone-A-Willy DIY Homemade Dildo Kit Light Skin Tone

It’s a fun experience to see an exact replica of “yourself.” It looks very lifelike with all the details. However, it does require quite a bit of coordination if you’re doing it on your own. For men who are above average in size, it should be noted that there isn’t enough “material” included in one pack. This should be made clear at the time of purchase. I found myself short of material when the mould needed to be filled. It’s a bit disappointing when there’s 4 cm missing in length. Otherwise… go for it. It looks very realistic.

It's a brilliant thing to do together, but it makes more mess than you'd expect 😅 very high level of detail. Vibrator's a bit bland compared to a fun thing to do together.

Good Guidance. There's not enough silicone, and I couldn't find more of the same colour at the shop.

The product is easy to use if you follow the guide. The finished casting is firm and dense in material, yet soft and comfortable, with a very good level of detail. However, the amount of silicone is insufficient if you're well-endowed; I only had enough silicone for 11cm of the "chap" (I am 19cm with a diameter of 4.5cm).

Works

I bought this for a laugh for my situationship, who also happens to be my ex. Two days after we turned his thing into a dildo, the avoidant king broke up with me for a second time. What on earth do I do with it now, Lmao. Well, it does work very well (as long as one can stay firm when the snake meets the tube). The silicone feels smooth and not sticky, and the DETAILS are incredibly lifelike. It truly looks like a 1:1 copy, every vein, every crease. It's definitely a unique idea and a new level of trust to offer your bed partner. Just a bit odd having your ex's DICK literally lying around in the toy box...

Easy to use and very similar to the original 😊 but if you're larger, additional silicone might need to be purchased.

Superb product. Easy to use and a great tool for one’s partner when out and about. I should have just had much, much, much more casting material. But that's just my curse. Thanks for a great product.

Exciting product that meets expectations; unfortunately, you must follow the instructions to the letter. If attempting this alone, you really need to maintain a proper erection, as things move swiftly. Personally, I ended up hitting the wall and damaging the mould, while finding it difficult to mix everything whilst staying firm, even with a cock ring. Recommended to do with a partner!

Made a casting that turned out well, though there should be a little more silicone in the package for what is to be cast.

Bra, a bit of a faff but the result turned out brilliantly. However, there wasn't quite enough silicone, should have bought an extra tub.

It's a fun idea, but that's about it. If you own anything bigger than that, don't buy it. The tube you pour the moulding material into is not roomy enough and the thicker stuff will force its way along the edges, so the mould will be very thin if it's not completely in the middle, so the mould won't be the right shape! It's a messy job and money wasted. I do not recommend. Suitable only for small sizes

The moulding was not quite good so the liquid itself went between the holes so the result was angular and had lots of spots. They could be cut so apart from those, it really was a copy! The disadvantage is that it scratches a little.

wife and i had a blast playing with this. giggled and laughed like lunatics while "cloning".

Surprisingly easy to do. Since my man is the best, this is the next best. Made from the best model. Feels just like a picture.

A bit challenging to make, time to stick to and messy, but the end result was fun to do together and a pretty realistic dude. I was borderline if there was enough stuffing, too small for the big guy ??

The can for the mould should be a bit bigger in width... 2 times tried and failed...

Poor instructions, read reviews before you start, they will give you better tips. But I do not recommend it! A fun thing became more complicated, more expensive and not nearly as fun as we thought. Poor vibration also brought down the rating

Made an attempt at moulding, just as the instructions said. The temperature is extremely important to keep track of. It became a pancake of everything. Can think that they should come with an extra bag if the casting fails completely, then you can make a new batch. Expectations were sky high so got a little eager. Ordered a new one to do it again. I will also do the moulding together with someone. A tip!

If you don't follow the instructions extremely carefully, the plug will harden before you can mould it, or you'll have other problems. It was extremely messy the times my girlfriend and I tried it. I don't quite understand how the moulding fluid would stay in the cylinder when you hold it on the penis, so I had to get down on all fours and bend my hips in a very strange way so that most of it wouldn't run out. In addition, the liquids are extremely sticky and really difficult to wash off. I recommend making it while lying/sitting on a plastic sheet that you throw away afterwards. The product is NOT suitable for: - Those who large or longer than 15cm. - If your penis curves or points up along your body when you are hard. It should preferably be about 13cm straight and point at an angle straight out of the body or downwards when you are hard. Then I would recommend the product to others.

Not moulded yet, but I imagine that a smaller pillbox, not mine, will not have room for the vibrating part which is 12-14 cm something just that. In other words, the product takes into account the 1% with 25 cm+ daggers, while the unloved ones can at best ignore the vibrating part.

I agree with other customers that the amount of silicone is not sufficient. About 1/3 could not be moulded. This is a real shame for the price. It is a real mess and should be well prepared. My result is quite satisfactory. The wife likes it.

The product itself is quite nice, but since I chose to make it myself as a fun surprise for the lady (for when I'm not at home), it was a bit of a hassle. Having to both ensure an erection and at the same time concentrate on the 2 minutes etc. during my period. It wasn't the easiest, but the result is quite good compared to what I did myself :)

Bought the kit without too high expectations, but how wrong I was! We laughed most of the time during the preparations and the actual casting, my darling helped by wearing the sexiest outfit during the whole process...! The cast in the mould was after it hardened, incredibly realistic with perfect glans, veins and all!!! However, you should carefully prepare everything and plan how and in what order everything should be done, becomes a bit stressful, a sexy partner really helps to have a hard-on throughout the work! If, like me, you have a slightly larger "template", around 20-22cm and rough, you should buy a batch of silicone, so it is enough for the entire dildo! Recommended!!!

Fun idea! Unfortunately, the material was not enough for a slightly larger than average penis. When we filled the mould, it was only enough to fill half of it. The information should say that if the penis is longer than 18cm 16cm in circumference, you have to buy extra material. Now we have half a penis! Ha ha!

Poor product

I have to admit that the penis cloning went better than I thought and it turned out very similar. A slight minus comes from the fact that the clone turned out a bit smaller than my own penis is due to the fact that maintaining an erection was not very easy. The process is not a terribly sexy one. Also, the filler was just enough even though my penis is only slightly bigger than normal. It's worth reading the instructions carefully and having all the supplies ready nearby. I'm going to give this to my wife as a gift and I think it will be a nice addition to our bedtime routine.

I got the temperature of the mould mass a little wrong, which meant that it solidified before I got the pick into it. Unfortunately, I could not get hold of a new clonemywillykit before the glory would be ready. But solved it with moulding compound from another supplier but with a longer curing time which was extremely demanding, penis ring was then a must. Casting one of the dildo itself was easy and the result was very detailed and good. But I must give some negative criticism to the moulding compound. It would have been damn good with an extra bag of powder so you can make two attempts. And the little toy thermometer that comes with it does not feel reasonable for the accuracy required when mixing the moulding compound.

Generally pretty good, fun to try out a little. a bit of a pain in the arse when the penis is really crooked, or completely top :D

The product itself is fun. But was too little batter for the actual moulding so did not get mine in full size.

Fun to do with someone.

Maintaining a steady stance for 2 minutes in a cool pond was not easy.

Great idea! However, if you want to mould one over 20 cm wide, you need 2 packs.

Good finished product, but quite difficult to do the moulding alone - and in my case, there is too little included powder and moulding compound in 1 set ....

think it's useless and don't think anyone else should waste money on it. it said it would take about 2 minutes before it solidified but took about 5 seconds ... will definitely not buy this again...

Really fun to make (at least if you get help from your partner) and it actually worked quite well for us. Made a good mould with plenty of powder. Unfortunately, there wasn't enough silicone, so the mould couldn't be filled completely. In other words, we ended up with a product that was only about 75% finished, which is a real shame. I think it's foolish to save on the silicone when, after all, that's what you need to make the finished product from. You can buy extra, but then you have to buy from the other brand "Cloneboy", which has bad reviews - and it is not stated whether the tub of silicone is larger or smaller than the one from Clone-A-Willy...

Nice gift for the missus

Great fun to make, just a lot of mess ???

A fun time together. Turned out really ok. But next time it will be even better...

One of the worst things I've come across. Not enough silicone to mould for those over 18-20cm. A waste of money.

Fun idea that gave the wife exactly the size of dildo she wanted.

We had read instructions several times and watched videos on YouTube. We agreed that he would just concentrate on being tough and I would do the moulding. He did his part really well, but it had time to harden for me before I got the lumps out. We still laugh about it, and I'll buy some more moulding powder for Christmas and keep our fingers crossed. It's a shame you can't buy extra silicone, it seems like people write that there is too little

The gift of dreams!!! Hahah. But you just have to be prepared for how long it takes to make it, as you have to wait over a number of times hours Service at Sinful is as always in tip top, received after two days

Now I just tried to make one on my own. It's a bit hard to be hard when you start to get the water temperature right, and while mixing the mould and for 2 minutes while waiting... when you have to focus so much on that, instead of something that can help you stay hard. 100% a 2 man job, or some pills that should be included in the package... don't even want to try to buy an extra moulding mix. Just seems like more money down the drain. The 1* is only for the fast delivery. Crappy product.

Fully satisfies

I am disappointed with the amount of mass as the mass was not even enough for the entire mould. Won't be the same if you only cast 2/3 of the penis...

It went quite well. For some reason I happened to come while we were working on it, so it got a little messier than it should be, haha. Cool thing in any case!

Our opinion, after two attempts, we have given up. Heated the water according to instructions and we thought we were fast, but he barely filled the mass to the "shape" before it was stiff either lumpy or completely. We tried 2 times with the same result. Nothing for us.

My boyfriend and I bought this set, we read that some people failed in the attempt to cast it, so we bought an extra casting powder. But we did not need it, because it went perfectly. Good instruction and really easy to use, it just needs to be kept going. But the boyfriend took care of that :-P We had super fun with it, and the result was mega good and really detailed .. we could easily do it again :-)

Good instructions etc but does not help if you have to be under 10cm to make some kind of copy, which in that case makes it quite useless

The product does not fail in anything, but you should write that if you are just a little well equipped, then there are not enough products at all. The tube it came in we could not use, it was not big enough in circumference. We even had alginate to put at home in advance, so we mixed a new serving and found a cup that fit. Then the imprint was ready! Then I mixed the silicone and poured in, it only filled up a little over half of the imprint, so it was all a waste of time.

A fun product if you want to make something special for your loved one! I also recommend doing it with your partner as it can be very difficult to do alone! Follow the instructions to the letter! If you're too slow, the moulding compound will harden before you even get the big guy in :)

Difficult to do alone, easier if your partner helps :)

By paying close attention to the instructions and making a choice after the reviews. I got hold of more silicone. Now the missus and I have made a perfect replica, so now it's fun.

This was a great experience ?? the fiancée loves the original and Willy is good no.2. due to tips from reviews it became 100 similar to the original. Want everyone to read reviews so that everyone gets the best possible experience.mvh the original

A very straightforward product to use! Very easy to use and the included instructions cover most things. I recommend watching the Clone-a-willy video a couple of times to get the rest of it. Some things you need to have ready before you start, but you almost have to expect that when moulding different parts. Worked really well, even got a pretty detailed mould in the end. I did this alone, so there was little help to be had from a partner - so it is recommended, as written earlier, to have a penis ring available. Otherwise, a very good product that I recommend to make everyday life, long distance relationship and play a little more fun!

It all went very well, although we did experience the moulding compound overflowing when the cock was inserted. When it was time to pour in the silicone, there wasn't enough and it was only just over half full. I think it works fine if you're average or below average size.

We tried to make a mould, during mixing the moulding material hardened and the process was ruined. It took maybe 40 seconds before the material was completely hardened. Waste of money.

I wanted to give my girlfriend something truly personal. That she could wear when I wasn't with her. So I ordered a kit. When we went to cast me, we took out everything we needed so everything was prepared. Then the hard part was holding the stand. And as I said, it was very difficult not to touch the pipe. But still think it was a good copy anyway. Fun to have done it together, I must say. My girlfriend was very happy for my copy of my sex :)

Fun experience to do together with your partner, lots of laughter along the way. A little bit of silicone but otherwise a very good copy of the dick and a very fun couple activity!

It didn't start out so well because we hadn't read the instructions carefully. However, after we ordered some new moulding powder, it went much better. I have to admit I'm surprised at how good the result has turned out. An experience every couple should have and it's 100% worth the money.

It was incredibly difficult and cumbersome to achieve. I gave it two tries but both failed. Maybe it was just me doing something wrong but I felt that the mould hardens very quickly and there was not much time after pouring until it hardens.

Fun product, but unfortunately if you are of a larger calibre, there will not be enough silicone, which means that it does not represent you as well

I would say just like all the others. I didn't succeed in the first attempt, but I had read that others didn't succeed in the first attempt either. So I bought an extra bag of moulding pots and in the second attempt we mixed it in the moulding tube instead of a bowl first. So now it's drying out. I think it would be good to add an extra moulding mix so you don't have to pay 79 extra. I am one of those who did not bother to try first and then write to sinful as others have done and got a new bag but fun to try. Looking forward to the result think it will be okay we take it as it is hehe

It's a fun and cheeky concept, but it's not easy to make. I managed to waste a lot of the silicone that was going to be used for the mould when I was introducing the warrior. This made the finished model look a little more deformed than the original ;) it was therefore not very popular with the girlfriend. However, it was fun to make it and I'm considering giving it another try. Would recommend it, and would also recommend that you improve before production.

It has been a mega fun experience where you can do something fun in an intimate way but you have to keep your tongue in your mouth when making the clone

Not a very good product. I read the instructions several times and with the amount of background information I found out, it can be a very tricky job. With a stopwatch, the time was measured, but still, as a craftsman, the end result is not satisfactory. The problems started as soon as the mould was made. Despite effective mixing, the mixture remained really uneven. There were lumps in the mould and the consistency was more like a lumpy porridge than a smooth mould. Unpleasant air bubbles remained in the mould. Another problem was sliding the lers into the porridge and keeping it away from the walls of the tube. Even though I quickly tried to throw the lerssi in, the porridge still managed to escape a little. The third problem was that I mixed the ingredients of the dildo myself carefully as the instructions said max 3 min. In that time the material had already started to stiffen a bit and it was a bit challenging to get it into the mould. The end result is a bit misshapen and full of little knuckles that come off the cock to the point of disgusting. The end result was not much to my wife's liking and it will probably end up as a comical toy. As a final note, while making the mould, holding the stand in all its majesty for two minutes while watching the stopwatch was quite a challenge even though I consider myself a fairly sprightly man. So if you have a bit of a challenge yourself, I recommend a medicine or penis ring and it probably wouldn't hurt anyway.

Good product. Excellent service: It is important that you are tidy and neat when you make the clone and have everything ready when you do. If you have company better Our first attempt to follow the instructions to the letter failed. It dried directly in the mould after 42 seconds of mixing, with temperature at 32 degrees and 414 ml of water. We got a great response from Sinful and they sent us a second spare kit free of charge. This time we did it successfully, using water at 20 degrees and 470ml of water. We mixed 30 seconds. And in total it took 3 minutes to harden. The clone looks very good, although we recommend reducing the amount of water a bit, depending on a faster setting. Maybe 440ml at about 20 degrees mixing for 30 seconds would be good so that in about 1 minute and a half / 2 minutes the mould is complete. Note that if you are curved you have to make a modification to the tube to make it perfect.

Mega cool product that we had fun and good laughs making and subsequently testing. It worked fine on the first attempt, but we had also prepared ourselves by reading all the comments and watching the video. It was a little tricky due to the slightly narrow tube and a slight curvature, but even though there was a small hole in the moulding compound, we managed to make a perfect clone. Highly recommend trying the product. We are happy

Fun experience but very difficult, you have to be fast :D

Great product, you just have to learn how to make it correctly but a great product, however, you could use a thicker tube for moulding as it is very thin when you are not allowed to touch the sides

The moulding compound solidified the second you started pouring it into the mould, even though you have exactly filled the instructions with time etc. We didn't get any further. But fun invention.

The 425 ml that it says did not work. It became very dry when you poured in the powder.

There is a nice and easy description of the product and how to use it. But like others here, I have also experienced the whole process was a bit difficult

We ordered this because of a funny thing. We saw no need for it before but laughed at the product and ordered it as it was cheap. Very funny experience when we (me and the wife) read the instructions for use and to keep the stand before casting. So while I am mixing, she has the task of keeping life down there before casting. We laughed a lot and it was a fun thing to do and it became a final product in the end, although there was a little too little silicone. In version 2, we would ignore the vibrator.

If you own a large one, you should buy an extra pack of the stuff to take with you. It got stubby and ended up in the trash when there wasn't enough.

Like others here, I experienced the first time that the moulding compound simply solidified the second I started pouring it into the mould so I could not make a mould at all. I did exactly as it said. I was precise with temperature and time but still failed. Sinful was kind enough to send me new moulding powder and the second time it worked because this time I used more water and only stirred for 15 seconds. I also have the advantage of having a smaller dick than usual so I actually mixed it in a shaker and used it as a mould so I could immediately stick my dick in and even mould my nuts :P

Ordered this one AND extra moulding powder after reading the comments

It may have been a bit difficult to keep the penis hard while driving it into the tube, even more difficult not to touch any of the edges! But we had a lot of fun, my partner and I. It may not be a perfect result, but we will definitely buy this kit more times and make more casts until we are completely satisfied with the results, and we will definitely have fun during the process!

Negative: *The tube could have been curved (realise no penis is straight) *Could have been a little more silicone. *Two moulding powders in case you fail would be better. Positive: *Right colour *Right hardness *Relatively easy to cast (I had no major problems, did it myself) I think many people have problems keeping a hard-on, but that's not the product's problem. But according to me, more silicone, double powder and a more curved tube, it is perfect. Understand that the price would be higher but it would not have done me anything. still bought 2 packs to be sure that everything was enough.

I bought this for my boyfriend and we tried to make it, but at first we failed. But then for my birthday he had made one himself and wrapped it as an extra gift (and even added a little glitter in the mix) It is without a doubt the best gift and it has been so much fun to use it at night! However, the vibrator is very noisy, but it was really unnecessary! Really lifelike, so nice and delicious! So now I always have him close at hand

It really is a fun and great buy. Like many other women, I was a little apprehensive about the power of the vibrator, but it's great! It's a fun thing to embark on, having to make a replica of a penis. Everything from the process of making it, to acting as a fluffer during drying, to using the finished dildo is a fun and enjoyable experience. I do have one criticism, however. As I see others mention, there is not a lot of material included. It is simply very difficult to fill the entire mould. It can therefore be an advantage to buy extra "filling".

Fun product. It can be difficult to keep the erection as the water must be 32 degrees. It's a bit cold. Would be better if it was body temperament. There is too little silicone if you are just a little above average. I'll get a new batch, but if it doesn't come with extra silicone, I'll have to buy an extra pack before I mould. As far as I can see, it comes with 200ml, and I need more like 250-300ml, and I'm not gigantic, but probably a little above average. 2 stars because it's a bit foolish to save on the primary material.

Brilliant idea to buy one of these. Always fun to try something new, especially when it works! Good investment, I just say

Great product and it's relatively easy to make the clone itself. However, you have to be a little quick, and get your girlfriend to play with the bandit while you make it so you don't go slack in it. 5 stars from here. It's a fun product and my boyfriend is happy with it :-) so you have to hope you win your gift card of 500 kr haha

Me and my girlfriend bought this toy for her as I am going on a long trip and she needs something more than her fingers. It had easy to read instructions and was easy to do to some extent but some things like the actual moulding process was a bit difficult as they spilled everywhere almost but good enough, the moulding material was easy to peel off from the skin and shower floor (highly recommend doing it in the shower) the vibrator itself was good with a lot of pull. It made her squirt a lot. The reason I give 4/5 stars is because it was a little difficult to get good but the result was okay but be careful when you mould it to get the good ones. In general, it is highly recommended as a good purchase.

This is first and foremost fun. Don't try it alone. The silicone is a bit hard if you insert a dildo. I guess it's a matter of taste ;) Use a penis ring. Sculptures should be taken out well. Remember it provides a legacy.

Was far too little silicone to be able to become the whole penis. Became maybe 2/3 parts of the penis when the vibrator was in. The guy has around 19 cm. Sad when you make it appear that it works for all different sizes, etc.

Making his own cast with his partner as company was gold. Very fun procedure and the result was a surprisingly detailed copy of his private part, a tip to have a penis ring close at hand to facilitate during the actual casting. Perfect to have in a distance relationship or if you often work elsewhere!

It's great to take a cast of yourself, it's something I would recommend if you're sitting on the fence :D But missed more silicone when junior became a juniorjunior when there was only silicone for 3/4 of the mould... so next time I will probably buy an extra with silicone ;) Must have full length on the guy ;) But some tips and tricks in ludo; 1. There are a few steps to be done before you take the cast, and when things are in motion, then the clock is running, literally! chuppchupp! (Penis ring highly recommended) 2. Take the moulding in the shower, or over something you can throw afterwards, because the casting compound was shit to remove afterwards.... (if you get it in carpets, it's bay-bay carpet afterwards... #experience) 3. When you have the silicone in, take something that vibrates against the pipe you have the moulding in, then you vibrate up the air bubbles and get a smoother result. 4. this is not something that is finished in an hour.... The moulding should be left for 4 hours while the silicone should be left for 24 hours ...

The first time we tried, we removed the thermometer from the holder, not a good idea because then it no longer knows what is 32 degrees. I was running around trying to keep it up while lesbian porn echoed at the highest volume in the background. The panic when the cock then got stage fright. It didn't want to cooperate anymore, it wanted to sleep. After 45 minutes we gave up and I offered the girl crackers without confidence. Next time I went all in. I contacted my doctor with a little white lie and suddenly the cock was ready to clone itself. 1. The biggest challenge was to stay hard for 2 minutes without touching. 2. There is not enough silicone if you do not want to use the vibrator and is about 17 long and 5 wide. 3. It is very natural if you succeed. 4. The girl is very happy :).

Probably good, but unfortunately the silicone hardened too quickly.

I watched the instructional video several times before I started, which helped during the process as there was no time to hesitate. I lined everything up on the floor so that everything was easily accessible during the process. I used a standard hand whisk and whisked the powder quickly for just under 30 seconds before pouring it into the tube. Recommend penis ring to reduce the risk of the penis going limp in the tube. I had to kneel and lean forward a bit so that the penis would not touch the edge of the tube. In conclusion, it takes a lot of concentration if you are alone when doing it, but the result is damn good if you follow the instructions! Definitely worth the money!

It's kind of funny. Worked the first time. Had looked thoroughly on the web how. Used a penis rig because it has to fit on almost SEK! In a hurry there was a bit of plastic missing and moulding at the end. But a lot of fun.

I did everything myself and it takes a little preparation but it is fine to solve yourself. However, difficult to keep a hard stand while standing and mixing powder haha. However, I noticed that there was too little silicone (What makes the dildo) and maybe 2/3 of my penis became a dildo. Do not have a very large penis but no abnormal or unusual. So you who have the model larger must think about it that you may not be able to get the whole as a dildo. The girl is very happy. It is always hard so I have to lie next to it sometimes instead, that is probably the biggest disadvantage.

The product works as it should _but_ you have to be very careful about the times. For example, I left the mould to dry overnight and by the morning it had shrunk and shrunk so it might be worth waiting the 4h and then immediately moving on to the next step of mixing and pouring the silicone mix into the mould. And when mixing the silicone paste you should be careful not to mix it too long because it starts to harden surprisingly fast. I would recommend that you mix the mass as quickly as possible and pour it into the mould immediately.

I got my Clone a Willy set the day after I bought it so really good and fast service. We had a really good experience with the set, and it was also a great gift for my boyfriend.

"I ordered this one and it has served me well. It has represented me well, so to speak. Hehe.

My spouse had such a wish for a birthday present. At first I was a bit hesitant, but I ordered it anyway. The making process was a success, following the instructions, and it turned out to be a pretty good copy, although I was a bit nervous about whether there would be enough material for a bigger thing. The finished product works well as a dildo and can also be fitted to a strap-on. Have you thought about how your own thing would feel in your butt? Or your spouse playing with another mirri with this? It works!

Super fun to make, not recommended to make yourself, it takes 2 to do it - There is no moulding material and also silicone for the moulding. We will try again with additional purchase of materials.